Aylin Ahadi

Stress partitioning in harmonic structure materials at the early stages of tensile loading studied in situ by synchrotron X-ray diffraction

Elis Sjögren-Levin, Wolfgang Pantleon, Aylin Ahadi, Zoltan Hegedüs, Ulrich Lienert, et al.
(2023) Scripta Materialia, 226
Journal article

Evolution of residual stress when turning a fillet radius in stainless steel

Yang Liu, Jian Weng, Rachid M'saoubi, Aylin Ahadi, Jinming Zhou
(2023) Journal of Manufacturing Processes, 85 p.216-226
Journal article

Molecular dynamics simulations of nanometric cutting of single crystal copper sheets using a diamond tool

Kevin Blixt, Lea Christierson, Aylin Ahadi, Per Hansson, Solveig Melin
(2023) Procedia Structural Integrity, 43 p.9-14
Conference paper

Photoelasticity of YVO4 through first-principles calculation

Amin Mirzai, Aylin Ahadi, Solveig Melin
(2022) World Congress in Computational Mechanics and ECCOMAS Congress : Computational Solid Mechanics
Conference paper

Influence of impurity configuration on electronic and optical properties of Ce-doped YVO₄ : Semi-local & hybrid functionals

Amin Mirzai, Solveig Melin, Aylin Ahadi
(2022) Computational Materials Science, 214
Journal article

Separation of XRD peak profiles in single-phase metals with bimodal grain structure to analyze stress partitioning

Elis Sjögren, Wolfgang Pantleon, Aylin Ahadi, Zoltan Hegedüs, Ulrich Lienert, et al.
(2022) IOP Conference Series: Materials Science and Engineering, 1249
Conference paper

Compositional analysis of oxide-embedded III-V nanostructures

Martin Ek, Leon Petersson, Jesper Wallentin, David Wahlqvist, Aylin Ahadi, et al.
(2022) Nanotechnology, 33
Journal article

Molecular dynamic modelling of the combined influence from strain rate and temperature at tensile loading of nanosized single crystal Cu beams

P. Hansson, A. Ahadi, S. Melin
(2022) Materials Today Communications, 31
Journal article

Reducing scrapping of gears by assessment of tip contact threshold torque

Rikard Hjelm, Aylin Ahadi, Jens Wahlström
(2022) Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 236 p.1613-1622
Journal article

Molecular dynamics-based characterisation of early oxide in Fe/Cr alloys

Leon Petersson, Filip Lenrick, Aylin Ahadi
(2022) Results in Surfaces and Interfaces, 9
Journal article

Investigation on residual stress evolution in nickel-based alloy affected by multiple cutting operations

Yang Liu, Dongdong Xu, Mathias Agmell, Aylin Ahadi, Jan Eric Stahl, et al.
(2021) Journal of Manufacturing Processes, 68 p.818-833
Journal article

Numerical and experimental investigation of tool geometry effect on residual stresses in orthogonal machining of Inconel 718

Yang Liu, Dongdong Xu, Mathias Agmell, Rachid M. Saoubi, Aylin Ahadi, et al.
(2021) Simulation Modelling Practice and Theory, 106
Journal article

Improvement of structural efficiency in metals by the control of topological arrangements in ultrafine and coarse grains

Abdallah Shokry, Aylin Ahadi, Per Ståhle, Dmytro Orlov
(2021) Scientific Reports, 11
Journal article

Influence of manufacturing error tolerances on contact pressure in gears

Rikard Hjelm, Hans Hansson, Aylin Ahadi, Carin Andersson, Jens Wahlström
(2021) Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235 p.5173-5185
Journal article

Gear tolerancing for simultaneous optimization of transmission error and contact pressure

R. Hjelm, A. Ahadi, J. Wahlström
(2021) Results in Engineering, 9
Journal article

First-principle investigation of doping effects on mechanical and thermodynamic properties of Y₂SiO₅

Amin Mirzai, Aylin Ahadi, Solveig Melin, P. A.T. Olsson
(2021) Mechanics of Materials, 154
Journal article

FE analysis on the association between tool edge radius and thermal-mechanical load in machining Inconel 718

Yang Liu, Andrii Hrechuk, Mathias Agmell, Aylin Ahadi, Jan Eric Stahl, et al.
(2021) Procedia CIRP, 102 p.91-96
Conference paper

Simulation of nanometric cutting using molecular dynamics

Kevin Blixt, Lea Christierson, Ismail Ak, Per Hansson, Aylin Ahadi
(2021) Procedia CIRP
Conference paper

Peridynamic modelling of harmonic structured materials under high strain rate deformation

Theodor de Sousa, Aylin Ahadi, Elis Sjögren, Dmytro Orlov
(2021)
Conference paper

Strain Rate Effects on Tensile and Compression Behavior of Nano-crystalline Nanoporous Gold: A Molecular Dynamic Study

Yunus Yildiz, Aylin Ahadi, Mesut Kirca
(2020) Mechanics of Materials, 143
Journal article

Molecular dynamics modelling of metric scaling effects in nanosized Cu beams holding a grain boundary

Per Hansson, Aylin Ahadi, Solveig Melin
(2020) Theoretical and Applied Fracture Mechanics, 107
Journal article

Grain boundary influence on the mechanical response to tensile loading for nanosized Cu beams modelled by MD simulations

Solveig Melin, Per Hansson, Aylin Ahadi
(2020) Procedia Structural Integrity, 23 p.137-142
Journal article

Numerical contribution to segmented chip effect on residual stress distribution in orthogonal cutting of Inconel718

Yang Liu, Mathias Agmell, Dongdong Xu, Aylin Ahadi, Jan Eric Stahl, et al.
(2020) International Journal of Advanced Manufacturing Technology, 109 p.993-1005
Journal article

Dislocation Generation from Grain Boundaries in Nanosized Cu-beams

Aylin Ahadi, Per Hansson, Solveig Melin
(2019)
Conference paper: abstract

Grain boundary influence on the mechanical response to tensile loading for nano-sized metallic beams modelled by MD simulations

Aylin Ahadi, Solveig Melin, Per Hansson
(2019) Grain boundary influence on the mechanical response to tensile loading for nano-sized metallic beams modelled by MD simulations
Conference paper

Grain boundary inflience at the nanoscale- a molecular dynamics investigation of Cu

Solveig Melin, Aylin Ahadi, Per Hansson
(2019)
Conference - other

Fully coupled thermo-mechanical modelling of the initial phase of the Friction Stir Welding Process using Finite Element Analysis

Aylin Ahadi, Ferran Roura Port
(2019) Advances in Materials Science and Engineering, 2 p.22-22
Journal article

Grain Size Effects on Tensile Behaviour of Nano-crystalline Nanoporous Gold

Yunus Yildiz, Aylin Ahadi, Mesut KIRCA
(2019)
Conference paper: abstract

Shear anisotropy in Si-Cu interfaces on the atomic scale

Dan Johansson, Per Hansson, Aylin Ahadi, Solveig Melin
(2019) Materials Physics and Mechanics, 42 p.646-655
Journal article

Capturing nanoscale effects by peridynamics

Aylin Ahadi, Solveig Melin
(2018) Mechanics of Advanced Materials and Structures, 25 p.1115-1120
Journal article

COATED NANOPOROUS STRUCTURES SUBJECTED TO STRESS RELIEF ANNEALING

Yunus Yildiz, Ahmet Semih ERTURK, Aylin Ahadi, Mesut KIRCA
(2018) Proceeding to NSCM31
Conference paper

FIRST PRINCIPLES CALCLATIONS OF MECHANCICAL LOAD ON OPTICAL PROPERTIES of Eu:Y2SiO5

Amin Mirzai, Aylin Ahadi, Solveig Melin
(2018) Proceeding to NSCM31
Conference paper

Effect of mechanical load on optical properties of un-doped and Eu3+-doped Y2SiO5 at the quantum scale

Amin Mirzai, Aylin Ahadi, Solveig Melin
(2018)
Conference paper

SHEAR ANISOTROPY IN Si-Cu INTERFACES ON THE ATOMIC SCALE

Dan Johansson, Per Hansson, Aylin Ahadi, Solveig Melin
(2018) SHEAR ANISOTROPY IN Si-Cu INTERFACES ON THE ATOMIC SCALE
Conference paper

Development of a simulation model to study tool loads in pcBN when machining AISI 316L

Mathias Agmell, Volodymyr Bushlya, Sampsa Laakso, Aylin Ahadi, Jan-Eric Ståhl
(2018) International Journal of Advanced Manufacturing Technology, 96 p.2853-2865
Journal article

Effects of voids in tensile single-crystal Cu nano-beams

Aylin Ahadi, Per Hansson, Solveig Melin
(2018) Molecular Dynamics
Book chapter

Anisotropic peridynamic model—Formulation and implementation

Aylin Ahadi, Jakob Krochmal
(2018) AIMS Materials Science, 5 p.742-755
Journal article

Tensile behavior of single-crystal nano-sized Cu beams – Geometric scaling effects

Aylin Ahadi, Per Hansson, Solveig Melin
(2017) Computational Materials Science, 135 p.127-133
Journal article

The influence of tool micro-geometry on stress distribution in turning operations of AISI 4140 by FE analysis

Mathias Agmell, Aylin Ahadi, Oleksandr Gutnichenko, Jan-Eric Ståhl
(2017) International Journal of Mechanical Sciences, 89 p.3109-3122
Journal article

Modeling subsurface deformation induced by machining of Inconel 718

M. Agmell, A. Ahadi, J. M. Zhou, R.L. Peng, V. Bushlya, et al.
(2017) Machining Science and Technology, 21 p.103-120
Journal article

Modeling subsurface deformation induced by machining of Inconel 718

M. Agmell, A. Ahadi, J. M. Zhou, R.L. Peng, V. Bushlya, et al.
(2017) Machining Science and Technology, 21 p.103-120
Journal article

Tensile behavior of single-crystal nano-sized copper beams with voids

Solveig Melin, Aylin Ahadi, Per Hansson
(2017) Solid State Phenomena, 258 SSP p.53-56
Conference paper

Strain rate effects at tensile loading of single crystal Cu nano-wires

Solveig Melin, Aylin Ahadi
(2017) , p.282-295
Conference paper

Tensile behaviour of single-crystal nano-sized Cu beams - geometric scaling effects

Aylin Ahadi, Per Hansson, Solveig Melin
(2017) Computational Materials Science
Journal article

Tensile Behavior of Single-crystal Nanosized Copper Beams with Voids

Solveig Melin, Aylin Ahadi, Per Hansson
(2017) Solid State Phenomena, 258 p.53-56
Journal article

Quantitative study of roughness effect in nanoindentation on AISI316L based on simulation and experiment

LING CHEN, Aylin Ahadi, Jinming Zhou, Jan-Eric Ståhl
(2017) Proceedings of the Institution of Mechanical Engineers. Part C: Journal of Mechanical Engineering Science, 231 p.4067-4075
Journal article

Implementation of Anisotropic Elasto-Plastic Peridynamic Model in PDLAMMPS

Aylin Ahadi, Jakob Krochmal
(2017)
Conference paper

Simulating nanoindentation of thin Cu films using molecular dynamics and peridynamics

Aylin Ahadi, Per Hansson, Solveig Melin
(2017) Solid State Phenomena, 258 SSP p.25-28
Journal article

The Influence the Uncut Chip Thickness has on the Stagnation Point in Orthogonal Cutting

Mathias Agmell, Daniel Johansson, Sampsa V.A. Laakso, Aylin Ahadi, Jan Eric Ståhl
(2017) Procedia CIRP, 58 p.13-18
Conference paper

Size dependence of the Poisson's ratio in single-crystal fcc copper nanobeams

Aylin Ahadi, Solveig Melin
(2016) Computational Materials Science, 111 p.322-327
Journal article

Necking in single-crystal fcc copper nanobeams

Aylin Ahadi, Solveig Melin
(2016) Proceedings to the 29th Nordic Seminar in Computational Mechanics
Conference paper

IMPLEMENTATION AND VALIDATION OF AN ANISOTROPIC PERIDYNAMIC INFLUENCE FUNCTION

Aylin Ahadi, Jakob Krochmal
(2016) Proceedings to the 29th Nordic Seminar in Computational Mechanics
Conference paper

Simulating nanoindentation of thin Cu films using molecular dynamics and peridynamics

Aylin Ahadi, Per Hansson, Solveig Melin
(2016) Proseeding to the 8th International Conference on MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE
Conference paper

Tensile behavior of single-crystal nano-sized copper beams with voids

Solveig Melin, Aylin Ahadi, Per Hansson
(2016) Proceedings to the 8th International Conference on MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE
Conference paper

Indentation of thin copper film using molecular dynamics and peridynamics

Aylin Ahadi, Per Hansson, Solveig Melin
(2016) Procedia Structural Integrity, 2 p.1343-1350
Journal article

Defect sensitivity of single-crystal nano-sized Cu beams

Solveig Melin, Per Hansson, Aylin Ahadi
(2016) Procedia Structural Integrity, 2 p.1351-1358
Journal article

POISSON'S RATIO AT NANOSCALE IN SINGLE-CRYSTAL FCC COPPER

Solveig Melin, Aylin Ahadi
(2015)
Conference paper

Characterization of probe contact effects on diffuse reflectance spectroscopy measurements

Nina Reistad, Mallory Mayjonade, Aylin Ahadi, Stefan Andersson-Engels
(2015) BioPhotonics South America (SPIE Proceedings), 9531 p.953143-953143
Conference paper

Indentation of thin copper film using peridynamics

Hugo Roca, Simon Bourreau, Aylin Ahadi, Solveig Melin
(2014)
Conference paper

Elastic nanobeam modelled using peridynamics - length scale effects

Simon Bourreau, Hugo Roca, Aylin Ahadi, Solveig Melin
(2014)
Conference paper

Simulation and biomechanical characterization of indentation on human skin

Mallory Mayjonade, Nina Reistad, Aylin Ahadi
(2014)
Conference paper

Numerical and experimental study of the roughness effects on mechanical properties of AISI316L by nanoindentation

Ling Chen, Aylin Ahadi, Jinming Zhou, Jan-Eric Ståhl
(2014) Modeling and Numerical Simulation of Material Science
Journal article

Identification of plasticity constants from orthogonal cutting and inverse analysis

Mathias Agmell, Aylin Ahadi, Jan-Eric Ståhl
(2014) Mechanics of Materials, 77 p.43-51
Journal article

The link between plasticity parameters and process parameters in orthogonal cutting

Mathias Agmell, Aylin Ahadi, Jan Eric Ståhl
(2013) Procedia CIRP, 8 p.224-229
Conference paper

Hyperelastic constants from a modified hardness test using energy balance obtained from FE-analysis

P. E. Austrell, A. Ahadi
(2013) Constitutive Models for Rubber VIII : Proceedings of the 8th European Conference on Constitutive Models for Rubbers (ECCMR VIII), San Sebastián, Spain, 25-28 June 2013 , p.225-231
Conference paper

Modeling and simulation of the mechanical response from nanoindentation test of DNA-filled viral capsids

Aylin Ahadi, Dan Johansson, Alex Evilevitch
(2013) Journal of Biological Physics, 39 p.183-199
Journal article

Modeling effect of surface roughness on nanoindentation tests

Ling Chen, Aylin Ahadi, Jinming Zhou, Jan-Eric Ståhl
(2013) Procedia CIRP, 8 p.334-339
Conference paper

Analysis of volume-average relations in continuum mechanics

Aylin Ahadi, Per Lidström
(2013) Mathematics and Mechanics of Solids, 18 p.476-505
Journal article

Analysis of the volume averaging relations in continuum mechanics

Aylin Ahadi, Per Lidström
(2012) Mathematics and Mechanics of Solids, 18 p.476-505
Journal article

Hur vänder man en kurs? Betraktelser över grundkursen i mekanik för industriell ekonomi våren 2012- kvalitativa och kvantitativa observationer från CEQ-utvärderingen

Aylin Ahadi, Solveig Melin, Nina Reistad
(2012) LTHs 7:e Pedagogiska Inspirationskonferens
Conference paper

Characterization of mechanical properties of machined surface by nanoindentation — Part 1: Simulation of indenter geometry effects

Ling Chen, Aylin Ahadi, Jinming Zhou, Jan-Eric Ståhl
(2012) Swedish Production Symposium, SPS12 : Proceedings
Conference paper

The affect of Johnson Cook plasticity parameters on the cutting process parameters

Mathias Agmell, Aylin Ahadi, Jan-Eric Ståhl
(2012) Proceedings of the 5th Swedish Production symposium (SPS'12)
Conference paper

Simulation of indenter geometry effects in nanoindentation

Ling Chen, Aylin Ahadi, Jinming Zhou
(2012)
Conference paper

Modelling Subsurface Deformation in High Speed Machining of Inconel 718

Mathias Agmell, Jinming Zhou, Aylin Ahadi, Volodymyr Bushlya, R.L. Peng, et al.
(2012)
Conference paper

On the Solution of Linear Equations

Aylin Ahadi, Per Lidström
(2012) Historielärarnas Förenings Årsskrift
Journal article (letter)

Hyperelastic constants from a modified hardness test using energy balance obtained from FE-analysis

Per Erik Austrell, Aylin Ahadi
(2012) Plastics, Rubber and Composites: Macromolecular Engineering
Journal article

Determination of hyperelastic properties of viral capsids using finite element calculation and nanoindentation

Aylin Ahadi
(2011) Journal of Nanoengineering and Nanosystems, 225 p.75-84
Journal article

A numerical and experimental investigation of the deformation zones and the corresponding cutting forces in orthogonal cutting

Mathias Agmell, Aylin Ahadi, Jan-Eric Ståhl
(2011) Advanced Materials Research, 223 p.152-161
Conference paper

Aylin Ahadi

Research:

Teaching:

Publications