Jan-Eric Ståhl

Degradation of multi-layer CVD-coated cemented carbide in finish milling compacted graphite iron

Rebecka Lindvall, Juan Manuel Bello Bermejo, Belén Cámara Herrero, Sebastian Sirén, Lena Magnusson Åberg, et al.
(2023) Wear, 522
Journal article

Predicting wear mechanisms of ultra-hard tooling in machining Ti6Al4V by diffusion couples and simulation

Rebecka Lindvall, Axel Bjerke, Armin Salmasi, Filip Lenrick, Rachid M'Saoubi, et al.
(2023) Journal of the European Ceramic Society, 43 p.291-303
Journal article

Additive Manufacturing Decision Support Systems : A Systematic Literature Review Discerning Current and Future Directions

Chinthan Rai, Shashank Bhanuprakash, Babak Kianian, Jan Eric Ståhl
(2022) Advances in Transdisciplinary Engineering, 21 p.553-565
Conference paper

On the function of lead (Pb) in machining brass alloys

Jakob Johansson, Per Alm, Rachid M’Saoubi, Per Malmberg, Jan Eric Ståhl, et al.
(2022) International Journal of Advanced Manufacturing Technology
Journal article

Performance and wear mechanisms of different PcBN tools when machining superalloy AD730

Henrik Persson, Volodymyr Bushlya, Luiz Franca, Jinming Zhou, Jan Eric Ståhl, et al.
(2022) Ceramics International, 48 p.22733-22742
Journal article

Multicomponent binders for PcBN performance enhancement in cutting tool applications

Kateryna Slipchenko, Volodymyr Bushlya, Denys Stratiichuk, Igor Petrusha, Antionette Can, et al.
(2022) Journal of the European Ceramic Society, 42 p.4513-4527
Journal article

Investigation on residual stress evolution in nickel-based alloy affected by multiple cutting operations

Yang Liu, Dongdong Xu, Mathias Agmell, Aylin Ahadi, Jan Eric Stahl, et al.
(2021) Journal of Manufacturing Processes, 68 p.818-833
Journal article

Onset of the degradation of CVD α-Al2O3 coating during turning of Ca-treated steels

Axel Bjerke, Andrii Hrechuk, Filip Lenrick, Rachid M'Saoubi, Henrik Larsson, et al.
(2021) Wear, 477
Journal article

Performance and wear mechanisms of uncoated cemented carbide cutting tools in Ti6Al4V machining

Rebecka Lindvall, Filip Lenrick, Rachid M'Saoubi, Jan Eric Ståhl, Volodymyr Bushlya
(2021) Wear, 477
Journal article

Evaluation of tool wear mechanisms and tool performance in machining single-phase tungsten

Mike Olsson, Volodymyr Bushlya, Filip Lenrick, Jan Eric Ståhl
(2021) International Journal of Refractory Metals and Hard Materials, 94
Journal article

Numerical and experimental investigation of tool geometry effect on residual stresses in orthogonal machining of Inconel 718

Yang Liu, Dongdong Xu, Mathias Agmell, Rachid M. Saoubi, Aylin Ahadi, et al.
(2021) Simulation Modelling Practice and Theory, 106
Journal article

Cryogenic and hybrid induction-assisted machining strategies as alternatives for conventional machining of refractory tungsten and niobium

Mike Olsson, Ville Akujärvi, Volodymyr Bushlya
(2021) International Journal of Refractory Metals and Hard Materials, 97
Journal article

Novel metric “Implenarity” for characterization of shape and defectiveness : The case of CFRP hole quality

Andrii Hrechuk, Volodymyr Bushlya, Jan Eric Ståhl, Vyacheslav Kryzhanivskyy
(2021) Composite Structures, 265
Journal article

Tool wear mechanisms of PcBN in machining Inconel 718 : Analysis across multiple length scale

Volodymyr Bushlya, Filip Lenrick, Axel Bjerke, Hisham Aboulfadl, Mattias Thuvander, et al.
(2021) CIRP Annals - Manufacturing Technology, 70 p.73-78
Journal article

Wear mechanisms of PcBN tools when machining AISI 316L

Henrik Persson, Filip Lenrick, Luiz Franca, Jan Eric Ståhl, Volodymyr Bushlya
(2021) Ceramics International, 47 p.31894-31906
Journal article

FE analysis on the association between tool edge radius and thermal-mechanical load in machining Inconel 718

Yang Liu, Andrii Hrechuk, Mathias Agmell, Aylin Ahadi, Jan Eric Stahl, et al.
(2021) Procedia CIRP, 102 p.91-96
Conference paper

Sintering of Superhard cBN-Based Materials with Ti₄WC₅

D. A. Stratiіchuk, K. V. Slipchenko, V. Z. Turkevich, N. M. Belyavina, V. M. Bushlya, et al.
(2020) Journal of Superhard Materials, 42 p.371-376
Journal article

Evolution of the Microstructure and Mechanical Properties of cBN-Based Cutting Tools with Silicides Compounds as Binder Phase

Kateryna Slipchenko, Denys Stratiichuk, Nadezhda Belyavina, Vladimir Turkevich, Volodymyr Bushlya, et al.
(2020) Advances in Transdisciplinary Engineering, 13 p.428-438
Conference paper

Performance and wear mechanisms of PCD and pcBN cutting tools during machining titanium alloy Ti6Al4V

Rebecka Lindvall, Filip Lenrick, Henrik Persson, Rachid M'Saoubi, Jan Eric Ståhl, et al.
(2020) Wear, 454-455
Journal article

Sintering of BN Based Composites with ZrC and Al under High Temperatures and Pressures

K. V. Slipchenko, D. A. Stratiichuk, V. Z. Turkevich, N. M. Bilyavyna, V. M. Bushlya, et al.
(2020) Journal of Superhard Materials, 42 p.229-234
Journal article

Sintering of cBN Based Materials with a TaC Binder for Cutting Tool Application

K. V. Slipchenko, D. A. Stratiichuk, V. Z. Turkevich, N. M. Belyavina, V. M. Bushlya, et al.
(2020) Journal of Superhard Materials, 42 p.51-57
Journal article

Investigation of mechanical and thermal loads in pcBN tooling during machining of Inconel 718

Mathias Agmell, Volodymyr Bushlya, Rachid M’Saoubi, Oleksandr Gutnichenko, Oleg Zaporozhets, et al.
(2020) International Journal of Advanced Manufacturing Technology, 107 p.1451-1462
Journal article

Machinability evaluation of low-lead brass alloys

J. Johansson, H. Persson, J. E. Ståhl, J. M. Zhou, V. Bushlya, et al.
(2020) Procedia Manufacturing, 38 p.1723-1730
Journal article

Sintering of binderless cubic boron nitride and its modification by β-Si₃N₄ additive for hard machining applications

V. Bushlya, I. Petrusha, O. Gutnichenko, O. Osipov, R. M'Saoubi, et al.
(2020) International Journal of Refractory Metals and Hard Materials, 86
Journal article

A machine learning based approach for determining the stress-strain relation of grey cast iron from nanoindentation

Jian Weng, Rebecka Lindvall, Kejia Zhuang, Jan Eric Ståhl, Han Ding, et al.
(2020) Mechanics of Materials, 148
Journal article

CBN-based cutting tools with niobium compounds as a binder phase

Kateryna Slipchenko, Volodymyr Bushlya, Denis Stratiichuk, Vladimir Turkevich, Jan Eric Ståhl
(2020) Procedia CIRP, 101 p.254-257
Conference paper

Study of wear mechanisms of cemented carbide tools during machining of single-phase niobium

Mike Olsson, Filip Lenrick, Rachid Msaoubi, Henrik Larsson, Andreas Markström, et al.
(2020) Wear, 450-451
Journal article

Numerical contribution to segmented chip effect on residual stress distribution in orthogonal cutting of Inconel718

Yang Liu, Mathias Agmell, Dongdong Xu, Aylin Ahadi, Jan Eric Stahl, et al.
(2020) International Journal of Advanced Manufacturing Technology, 109 p.993-1005
Journal article

Tool–chip thermal conductance coefficient and heat flux in machining : Theory, model and experiment

V. Kryzhanivskyy, R. M’ Saoubi, J. E. Ståhl, V. Bushlya
(2019) International Journal of Machine Tools and Manufacture, 147
Journal article

The influence of sintering temperature on phase composition and mechanical properties of сbn-based composites with addition of vanadium compounds

Kateryna Vyacheslavivna Slipchenko, I. A. Petrusha, V. Z. Turkevich, D. A. Stratiichuk, V. M. Slipchenko, et al.
(2019) Metallofizika i Noveishie Tekhnologii, 41 p.1599-1610
Journal article

Determining process parameters for successful material reclamation of lead-free brass chips using hot forging operations: Lubrication

J. Johansson, O. Gutnichenko, J. E. Ståhl, V. Bushlya, F. Schultheiss
(2019) Procedia CIRP, 80 p.108-113
Conference paper

Multi-objective testing of different brass alloy components for DFM

Sampsa Laakso, Jakob Johansson, Daniel Johansson, Fredrik Schultheiss, Jan-Eric Ståhl
(2019) Procedia CIRP, 81 p.127-132
Conference paper

Quantitative analysis of chip segmentation in machining using an automated image processing method

Andrew Hrechuk, Volodymyr Bushlya, Rachid M'Saoubi, Jan Eric Ståhl
(2019) Procedia CIRP, 82 p.314-319
Conference paper

Load effect on scratch micro-mechanisms of solution strengthened Compacted Graphite Irons

Rohollah Ghasemi, Jakob Johansson, Jan-Eric Ståhl, Anders E. W. Jarfors
(2019) Tribology International, 133 p.182-192
Journal article

Dynamic effects on cutting forces with highly positive versus highly negative cutting edge geometries

A. Agic, M. Eynian, J. E. Ståhl, T. Beno
(2019) International Journal on Interactive Design and Manufacturing, 13 p.557-565
Journal article

On chemical and diffusional interactions between PCBN and superalloy Inconel 718 : Imitational experiments

V. Bushlya, A. Bjerke, V. Z. Turkevich, F. Lenrick, I. A. Petrusha, et al.
(2019) Journal of the European Ceramic Society, 39 p.2658-2665
Journal article

Small scale testing of PCD and WC-Co tooling in rock cutting using longitudinal turning

Daniel Johansson, Andrew Hrechuk, Volodymyr Bushlya, Malin Mårtensson, Antionette Can, et al.
(2019) Wear, 426-427 p.1515-1522
Journal article

Experimental analysis of cutting edge effects on vibrations in end milling

A. Agic, M. Eynian, J. E. Ståhl, T. Beno
(2019) CIRP Journal of Manufacturing Science and Technology, 24 p.66-74
Journal article

Assessment of Metal Cutting Tools using Cost Performance Ratio and Tool Life Analyses

Daniel Johansson, Rebecka Lindvall, Christina Windmark, Rachid M’Saoubi, Antionette Can, et al.
(2019) Procedia Manufacturing, 38 p.816-823
Journal article

Hole-quality evaluation in drilling fiber-reinforced composites

Andrew Hrechuk, Volodymyr Bushlya, Jan Eric Ståhl
(2018) Composite Structures, 204 p.378-387
Journal article

Heat flux in metal cutting : Experiment, model, and comparative analysis

V. Kryzhanivskyy, V. Bushlya, O. Gutnichenko, R. M'Saoubi, J. E. Ståhl
(2018) International Journal of Machine Tools and Manufacture, 134 p.81-97
Journal article

Metallmatriskompositer i masstillverkade komponenter och produkter : - MMC 2016-2018

Jan-Eric Ståhl, Volodymyr Bushlya, Lanny Kirkhorn, Fredrik Schultheiss, Jakob Johansson
(2018)
Report

Analysis of the minimum chip thickness during turning of duplex stainless steel

Fredrik Schultheiss, Mathias Agmell, Volodymyr Bushlya, Jan Eric Ståhl
(2018) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 233 p.1733-1744
Journal article

Cost-based pricing for learning organizations – a model presentation and demonstration

Jan-Eric Ståhl, Christina Windmark, Babak Kianian
(2018) Procedia Manufacturing, 25 p.239-246
Journal article

CPR a general Cost Performance Ratio in Manufacturing - A KPI for judgement of different technologies and development scenarios

Christina Windmark, Volodymyr Bushlya, Jan-Eric Ståhl
(2018) Procedia CIRP, 72 p.1220-1226
Conference paper

The mystery of missing feed force — The effect of friction models, flank wear and ploughing on feed force in metal cutting simulations

Sampsa V.A. Laakso, Mathias Agmell, Jan Eric Ståhl
(2018) Journal of Manufacturing Processes, 33 p.268-277
Journal article

Assessment on abrasiveness of high chromium cast iron material on the wear performance of PCBN cutting tools in dry machining

Ling Chen, Jan Eric Stahl, Wu Zhao, Jinming Zhou
(2018) Journal of Materials Processing Technology, 255 p.110-120
Journal article

Machinability and manufacturing cost in low-lead brass

Fredrik Schultheiss, Christina Windmark, Stefan Sjöstrand, Magnus Rasmusson, Jan Eric Ståhl
(2018) International Journal of Advanced Manufacturing Technology, 99 p.2101-2110
Journal article

Development of a simulation model to study tool loads in pcBN when machining AISI 316L

Mathias Agmell, Volodymyr Bushlya, Sampsa Laakso, Aylin Ahadi, Jan-Eric Ståhl
(2018) International Journal of Advanced Manufacturing Technology, 96 p.2853-2865
Journal article

FE simulation and experimental verification of side-flow and burr formation in machining of oxygen-free copper

Mike Olsson, Henrik Persson, Mathias Agmell, Volodymyr Bushlya, Jan Eric Ståhl
(2018) Procedia CIRP, 72 p.1427-1432
Conference paper

Selecting Cutting Data Tests for Cutting Data Modeling Using the Colding Tool Life Model

Daniel Johansson, Ville Akujärvi, Sören Hägglund, Volodymyr Bushlya, Jan Eric Ståhl
(2018) Procedia CIRP, 72 p.197-201
Conference paper

Investigation of the mechanical properties and cutting performance of cBN-based cutting tools with Cr₃C₂ binder phase.

Kateryna Slipchenko, Igor Petrusha, Vladimir Turkevich, Jakob Johansson, Volodymyr Bushlya, et al.
(2018) Procedia CIRP, 72 p.1433-1438
Conference paper

Influence of oxygen on the tool wear in machining

Volodymyr Bushlya, Filip Lenrick, Jan Eric Ståhl, Rachid M'Saoubi
(2018) CIRP Annals - Manufacturing Technology, 67 p.79-82
Journal article

Experimental investigations into tool wear of drilling CFRP

Andrew Hrechuk, Volodymyr Bushlya, Rachid M'Saoubi, Jan Eric Ståhl
(2018) Procedia Manufacturing, 25 p.294-301
Journal article

The correct way of splitting tools - Optimization of instrument design for measuring contact stress distribution

Sampsa V.A. Laakso, Volodymyr Bushlya, Jan Eric Ståhl
(2018) Procedia Manufacturing, 25 p.97-102
Journal article

Surface roughness and sub-surface deformation measurements in machining of niobium

Mike Olsson, Henrik Persson, Volodymyr Bushlya, Jan-Eric Ståhl
(2018) Procedia CIRP, 71 p.413-417
Conference paper

Modelling tool life in high speed machining of AD730

Henrik Persson, Daniel Johansson, Zhe Chen, Filip Lenrick, Rachid M'Saoubi, et al.
(2018) Procedia Manufacturing, 25 p.316-321
Journal article

Surface Characterization of AD730^TM Part Produced in High Speed Turning with CBN tool

J. M. Zhou, H. Persson, Z. Chen, R. M'Saoubi, D. Gustafsson, et al.
(2018) Procedia CIRP, 71 p.215-220
Conference paper

Особливості формування структури та фазового складу в процесі реакційного спікання кубічного нітриду бору зі сполуками Ti, Cr, V

K. V. Slipchenko, I. A. Petrusha, V. Z. Turkevich, V. M. Bushlya, J. E. Stahl
(2018) Metallofizika i Noveishie Tekhnologii, 40 p.1081-1091
Journal article

Influence of graphite nanoadditives to vegetable-based oil on machining performance when MQCL assisted hard turning

Oleksandr Gutnichenko, Volodymyr Bushlya, Sverker Bihagen, Jan Eric Ståhl
(2018) Procedia CIRP, 77 p.437-440
Conference paper

Tool Wear Mechanisms of pcBN tooling during High-Speed Machining of Gray Cast Iron

Fredrik Schultheiss, Volodymyr Bushlya, Filip Lenrick, Daniel Johansson, Stefan Kristiansson, et al.
(2018) Procedia CIRP, 77 p.606-609
Conference paper

Equivalent Chip Thickness and its Influence on Tool Life

Daniel Johansson, Rebecka Lindvall, Malin Fröström, Volodymyr Bushlya, Jan-Eric Ståhl
(2018) Procedia Manufacturing, 25 p.344-350
Journal article

An inverse problem for retrieving time dependency of heat flux in metal cutting via linear programming

V Kryzhanivskyy, O Shupikov, V Bushlya, O Gutnichenko, M Hörndahl, et al.
(2018) Procedia Manufacturing, 25 p.287-293
Journal article

Superhard pcBN materials with chromium compounds as a binder

Kateryna Slipchenko, Vladimir Turkevich, Igor Petrusha, Volodymyr Bushlya, Jan-Eric Ståhl
(2018) Procedia Manufacturing, 25 p.322-329
Journal article

Minimum quantity lubrication (MQL) with carbon nanostructured additives in sheet metal forming

Lanny Kirkhorn, Oleksandr Gutnichenko, Sverker Bihagen, Jan-Eric Ståhl
(2018) Procedia Manufacturing, 25 p.375-381
Journal article

Influence of GnP additive to vegetable oil on machining performance when MQL-assisted turning Alloy 718

Oleksandr Gutnichenko, Volodymyr Bushlya, Sverker Bihagen, Jan-Eric Ståhl
(2018) Procedia Manufacturing, 25 p.330-337
Journal article

Application of Colding tool life equation on the drilling fiber reinforcement polymers

Andrew Hrechuk, Daniel Johansson, Volodymyr Bushlya, Leonid Devin, Jan-Eric Ståhl
(2018) Procedia Manufacturing, 25 p.302-308
Journal article

Tool wear and machining dynamics when turning high chromium white cast iron with pcBN tools

Oleksandr Gutnichenko, Volodymyr Bushlya, Jinming Zhou, Jan Eric Ståhl
(2017) Wear, 390-391 p.253-269
Journal article

Nano-Scratching resistance of high-chromium white cast iron and its correlation with wear of cBN tool in machining

L. Chen, J. Persson, J. E. Ståhl, J. M. Zhou
(2017) Journal of Superhard Materials, 39 p.365-372
Journal article

Effect of cutting edge radius on surface roughness and tool wear in hard turning of AISI 52100 steel

T. Zhao, J. M. Zhou, V. Bushlya, J. E. Ståhl
(2017) International Journal of Advanced Manufacturing Technology, 91 p.3611-3618
Journal article

Sensitivity of Colding tool life equation on the dimensions of experimental dataset

D. Johansson, Solveig Hägglund, V. Bushlya, J. E. Ståhl
(2017) Journal of Superhard Materials, 39 p.271-281
Journal article

Correlation between edge radius of the cBN cutting tool and surface quality in hard turning

T. Zhao, M. Agmell, Johan Persson, V. Bushlya, J. E. Ståhl, et al.
(2017) Journal of Superhard Materials, 39 p.251-258
Journal article

Influence of radial depth of cut on entry conditions and dynamics in face milling application

A. Agic, M. Eynian, Solveig Hägglund, J. E. Ståhl, T. Beno
(2017) Journal of Superhard Materials, 39 p.259-270
Journal article

Superhard pcBN tool materials with Ti₃SiC₂ MAX-phase binder : Structure, properties, application

T. Kolabylina, V. Bushlya, I. A. Petrusha, D. Johansson, J. E. Ståhl, et al.
(2017) Journal of Superhard Materials, 39 p.155-165
Journal article

Influence of tool material and tool wear on tool temperature in hard turning reconstructed via inverse problem solution

V. Kryzhanivskyy, V. Bushlya, O. Gutnichenko, R. M’Saoubi, J. E. Ståhl
(2017) Journal of Superhard Materials, 39 p.192-202
Journal article

Wear mechanisms of uncoated and coated cemented carbide tools in machining lead-free silicon brass

Volodymyr Bushlya, Daniel Johansson, Filip Lenrick, Jan Eric Ståhl, Fredrik Schultheiss
(2017) Wear, 376-377 p.143-151
Journal article

Performance and wear mechanisms of novel superhard diamond and boron nitride based tools in machining Al-SiCp metal matrix composite

Volodymyr Bushlya, Filip Lenrick, Oleksandr Gutnichenko, Igor Petrusha, Oleksandr Osipov, et al.
(2017) Wear, 376-377 p.152-164
Journal article

The influence of tool micro-geometry on stress distribution in turning operations of AISI 4140 by FE analysis

Mathias Agmell, Aylin Ahadi, Oleksandr Gutnichenko, Jan-Eric Ståhl
(2017) International Journal of Mechanical Sciences, 89 p.3109-3122
Journal article

Modeling subsurface deformation induced by machining of Inconel 718

M. Agmell, A. Ahadi, J. M. Zhou, R.L. Peng, V. Bushlya, et al.
(2017) Machining Science and Technology, 21 p.103-120
Journal article

Modeling subsurface deformation induced by machining of Inconel 718

M. Agmell, A. Ahadi, J. M. Zhou, R.L. Peng, V. Bushlya, et al.
(2017) Machining Science and Technology, 21 p.103-120
Journal article

Comparative study on the machinability of lead-free brass

Fredrik Schultheiss, Daniel Johansson, Volodymyr Bushlya, Jinming Zhou, Kent Nilsson, et al.
(2017) Journal of Cleaner Production, 149 p.366-377
Journal article

Quantitative study of roughness effect in nanoindentation on AISI316L based on simulation and experiment

LING CHEN, Aylin Ahadi, Jinming Zhou, Jan-Eric Ståhl
(2017) Proceedings of the Institution of Mechanical Engineers. Part C: Journal of Mechanical Engineering Science, 231 p.4067-4075
Journal article

An integrated cost model for metal cutting operations based on engagement time and a cost breakdown approach

Jan Eric Ståhl
(2017) International Journal of Manufacturing Research, 12 p.379-404
Journal article

Too Sharp for its Own Good – Tool Edge Deformation Mechanisms in the Initial Stages of Metal Cutting

S.V.A. Laakso, T. Zhao, M. Agmell, A. Hrechuk, J.-E. Ståhl
(2017) Procedia Manufacturing, 11 p.449-456
Journal article

Hot Forging Operations of Brass Chips for Material Reclamation after Machining Operations

Jakob Johansson, Lisa Ivarsson, Jan Eric Ståhl, Volodymyr Bushlya, Fredrik Schultheiss
(2017) Procedia Manufacturing, 11 p.584-592
Journal article

Assessment of Commonly used Tool Life Models in Metal Cutting

Daniel Johansson, Sören Hägglund, Volodymyr Bushlya, Jan Eric Ståhl
(2017) Procedia Manufacturing, 11 p.602-609
Journal article

Computational and Experimental Inverse Problem Approach for Determination of Time Dependency of Heat Flux in Metal Cutting

V. Kryzhanivskyy, V. Bushlya, O. Gutnichenko, Rachid M'Saoubi, J. E. Ståhl
(2017) Procedia CIRP, 58 p.122-127
Conference paper

Experimental and Numerical Investigation of Burr Formation in Intermittent Turning of AISI 4140

Henrik Persson, Mathias Agmell, Volodymyr Bushlya, Jan Eric Ståhl
(2017) Procedia CIRP, 58 p.37-42
Conference paper

Modeling of Force Build-up Process and Optimization of Tool Geometry when Intermittent Turning

O. Gutnichenko, A. Agic, J. E. Ståhl
(2017) Procedia CIRP, 58 p.393-398
Conference paper

The Influence the Uncut Chip Thickness has on the Stagnation Point in Orthogonal Cutting

Mathias Agmell, Daniel Johansson, Sampsa V.A. Laakso, Aylin Ahadi, Jan Eric Ståhl
(2017) Procedia CIRP, 58 p.13-18
Conference paper

Residual stress analysis of machined lead-free and lead-containing brasses

Pui Lam Tam, Fredrik Schultheiss, Jan-Eric Ståhl, Lars Nyborg
(2016) Materials Science and Technology, 32 p.1789-1793
Journal article

Requirements and potential for high performance cutting tools based on superhard phases in new applications

Jan-Eric Ståhl
(2016) , p.1-3
Conference paper

Effect of feed on sub-surface deformation and yield strength of oxygen-free pitch copper in machining

Mike Olsson, Volodymyr Bushlya, Jinming Zhou, Jan-Eric Ståhl
(2016) Procedia CIRP, 45 p.103-106
Conference paper

The industrial way to make product cost calculations in crushing & screening

Per Hedvall, Jan Eric Ståhl
(2016) IMPC 2016 - 28th International Mineral Processing Congress, 2016-September
Conference paper

Ultrahard boron nitride material through a hybrid laser/waterjet based surface treatment

Ammar A. Melaibari, Jingnan Zhao, Pal Molian, Volodymyr Bushlya, Jinming Zhou, et al.
(2016) Acta Materialia, 102 p.315-322
Journal article

Modeling the cost of varying surface finish demands during longitudinal turning operations

Fredrik Schultheiss, Sören Hägglund, Jan-Eric Ståhl
(2016) International Journal of Advanced Manufacturing Technology, 84 p.1103-1114
Journal article

Machinability analysis of ISO-grouped workpiece material : -With focus on cutting force modelling

Mikael Linde, Sören Hägglund, Fredrik Schultheiss, Volodymyr Bushlya, Jan-Eric Ståhl
(2016)
Conference paper

Quantification of the Tolerance Cost as Part of the Product Realization Process

Fredrik Schultheiss, Johan Rasmusson, Jan-Eric Ståhl
(2016)
Conference paper

Comparative Study on the Machinability and Manufacturing Cost in Low-Lead Brass

Fredrik Schultheiss, Stefan Sjöstrand, Magnus Rasmusson, Christina Windmark, Jan-Eric Ståhl
(2016) Proceedings of the 26th International Conference on Flexible Automation and Intelligent Manufacturing , p.496-503
Conference paper

Machinability of CuZn21Si3P brass

Fredrik Schultheiss, Daniel Johansson, Mikael Linde, Pui Lam Tam, Volodymyr Bushlya, et al.
(2016) Materials Science and Technology, 32 p.1744-1750
Journal article

Influence of Cutting Edge Geometry on Force Build-up Process in Intermittent Turning

A. Agic, O. Gutnichenko, M. Eynian, J. E. Ståhl
(2016) Procedia CIRP, 46 p.364-367
Conference paper

Tool Wear and Vibrations Generated When Turning High-chromium White Cast Iron with pCBN Tools

O. Gutnichenko, V. Bushlya, J. M. Zhou, J. E. Stahl
(2016) Procedia CIRP, 46 p.285-289
Conference paper

Characterization of Microstructure and Mechanical Properties of High Chromium Cast Irons Using SEM and Nanoindentation

Ling Chen, Srinivasan Iyengar, Jinming Zhou, Krystof Turba, Jan-Eric Ståhl
(2015) Journal of Materials Engineering and Performance, 24 p.98-105
Journal article

On the Analytical Representation of Chip Area and Tool Geometry when Oblique Turning with Round Tools. Part 2: Variation of Tool Geometry along the Edge Line

Volodymyr Bushlya, Fredrik Schultheiss, Oleksandr Gutnichenko, Jinming Zhou, Jan-Eric Ståhl
(2015) 15th CIRP Conference on Modelling of Machining Operations (15TH CMMO), 31 p.423-428
Conference paper

On the Analytical Representation of Chip Area and Tool Geometry when Oblique Turning with Round Tools. Part 1: Chip Area Parameters under Variation of Side and Back Rake Angle

Volodymyr Bushlya, Fredrik Schultheiss, Oleksandr Gutnichenko, Jinming Zhou, Jan-Eric Ståhl
(2015) 15th CIRP Conference on Modelling of Machining Operations (15TH CMMO), 31 p.417-422
Conference paper

Influences of micro mechanical property and microstructure on performance of machining high chromium white cast iron with cBN tools

Ling Chen, Jinming Zhou, Volodymyr Bushlya, Jan-Eric Ståhl
(2015) 15th CIRP Conference on Modelling of Machining Operations (15TH CMMO), 31 p.172-178
Conference paper

Performance assessment of pCBN and bCBN tools in machining of high-chromium white cast iron

Ling Chen, Jinming Zhou, Volodymyr Bushlya, Oleksandr Gutnichenko, Jan-Eric Ståhl
(2015) International Journal of Advanced Manufacturing Technology, 79 p.635-644
Journal article

Modelling and Experimental Investigation of Cutting Temperature when Rough Turning Hardened Tool Steel with PCBN Tools

V. Kryzhanivskyy, Volodymyr Bushlya, Oleksandr Gutnichenko, I. A. Petrusha, Jan-Eric Ståhl
(2015) 15th CIRP Conference on Modelling of Machining Operations (15TH CMMO), 31 p.489-495
Conference paper

HP-HT sintering, microstructure, and properties of B6O- and TiC-containing composites based on cBN

Dmytro Turkevych, Volodymyr Bushlya, Jan-Eric Ståhl, I. A. Petrusha, N. N. Belyavina, et al.
(2015) Journal of Superhard Materials, 37 p.143-154
Journal article

Analysis of In Situ Mechanical Properties of Phases in High-Alloyed White Iron Measured by Grid Nanoindentation

Ling Chen, Jan-Eric Ståhl, Jinming Zhou
(2015) Journal of Materials Engineering and Performance, 24 p.4022-4031
Journal article

Residual stresses in high speed turning of nickel-based superalloy

R. L. Peng, J. M. Zhou, S. Johansson, A. Bellinius, V. Bushlya, et al.
(2014) HTM - Journal of Heat Treatment and Materials, 69 p.46-53
Journal article

Influence of cutting speed and tool wear on vibrations and process stability when turning Inconel 718 with PCBN tools

Oleksandr Gutnichenko, Volodymyr Bushlya, Jinming Zhou, Jan Eric Ståhl
(2014) International Journal of Manufacturing Research, 9 p.173-193
Journal article

Modeling and experimentation on multistage work-hardening mechanism in machining with nose-radiused tools and its influence on machined subsurface quality and tool wear

Volodymyr Bushlya, Jinming Zhou, Jan-Eric Ståhl
(2014) International Journal of Advanced Manufacturing Technology, 73 p.545-555
Journal article

Influence of the minimum chip thickness on the obtained surface roughness during turning operations

Fredrik Schultheiss, Sören Hägglund, Volodymyr Bushlya, Jinming Zhou, Jan-Eric Ståhl
(2014) Procedia CIRP, 13 p.67-71
Conference paper

Analysis of subsurface microstructure and residual stresses in machined Inconel 718 with PCBN and Al2O3-SiCw tools

Jinming Zhou, Volodymyr Bushlya, Ru Lin Peng, Zhe Chen, Sten Johansson, et al.
(2014) Procedia CIRP, 13 p.150-155
Conference paper

Tool wear and tool life of PCBN, binderless cBN and wBN-cBN tools in continuous finish hard turning of cold work tool steel

Volodymyr Bushlya, Oleksandr Gutnichenko, Jinming Zhou, Jan-Eric Ståhl, S. Gunnarsson
(2014) Journal of Superhard Materials, 36 p.49-60
Journal article

Numerical and experimental study of the roughness effects on mechanical properties of AISI316L by nanoindentation

Ling Chen, Aylin Ahadi, Jinming Zhou, Jan-Eric Ståhl
(2014) Modeling and Numerical Simulation of Material Science
Journal article

Identification of plasticity constants from orthogonal cutting and inverse analysis

Mathias Agmell, Aylin Ahadi, Jan-Eric Ståhl
(2014) Mechanics of Materials, 77 p.43-51
Journal article

Machinability and process stability when turning Alloy 718 with standard and produced by selective laser sintering toolholders

Oleksandr Gutnichenko, Volodymyr Bushlya, Jinming Zhou, Jan-Eric Ståhl, Pajazit Avdovic, et al.
(2014) [Host publication title missing]
Conference paper

Influence of the Workpiece Material Properties on the Cutting Forces

Fredrik Schultheiss, Volodymyr Bushlya, Jinming Zhou, Jan-Eric Ståhl
(2014) Proceedings of the 6th Swedish Production Symposium
Conference paper

Batch size optimization based on production part cost

Christina Windmark, Kathrine Spang, Fredrik Schultheiss, Jan-Eric Ståhl
(2014) FAIM 2014 - Proceedings of the 24th International Conference on Flexible Automation and Intelligent Manufacturing: Capturing Competitive Advantage via Advanced Manufacturing and Enterprise Transformation , p.1031-1038
Conference paper

Tool Life and Wear Modelling in Metal Cutting, Part 2 ─ Based on Combining the Archard and the Colding Equations

Jan-Eric Ståhl, Daniel Johansson, Fredrik Schultheiss, Jinming Zhou, Volodymyr Bushlya
(2014) Proceedings of the 6th Swedish Production Symposium
Conference paper

Self-generated vibrations and process stability when turning high chromium white cast iron with PCBN tools

Oleksandr Gutnichenko, Ling Chen, Jinming Zhou, Volodymyr Bushlya, Jan-Eric Ståhl
(2014) Proceedings of the 6th Swedish Production Symposium
Conference paper

Nano graphite flakes as lubricant additive

Lanny Kirkhorn, Oleksandr Gutnichenko, Oleksandr Melnyk, Volodymyr Bushlya, Jan-Eric Ståhl
(2014) Proceedings of the 6th Swedish Production Symposium
Conference paper

Cost Analysis for Crushing and Screening: Development of a Methodology for Determination of Production Cost for Product Fractions

Alexander Lindström, Erik Rading Heyman, Per Hedvall, Fredrik Schultheiss, Jan-Eric Ståhl
(2014) Proceedings of the 6th Swedish Production Symposium
Conference paper

Machinability of Ductile Single-Phase Materials Used in Accelerator Components - A Study with Focus on Surface Integrity

Mike Olsson, Anders Andersson, Fredrik Schultheiss, Volodymyr Bushlya, Jan-Eric Ståhl
(2014) Proceedings of the 6th Swedish Production Symposium
Conference paper

Tolerance Cost in Relation to Surface Finish during Longitudinal Turning Operations

Jan-Eric Ståhl, Fredrik Schultheiss, Sören Hägglund
(2014) Proceedings of the 6th Swedish Production Symposium
Conference paper

Production Cost Case Generation by a Recursive Monte-Carlo Method in Electrical Machine Production

Pontus Fyhr, Jan-Eric Ståhl, Mats Andersson
(2014) [Host publication title missing]
Conference paper

Statistical interfaces for production of a permanent magnet based rotor

Pontus Fyhr, Jan-Eric Ståhl, Mats Andersson
(2014) Electric Drives Production Conference (EDPC), 2014 4th International , p.1-6
Conference paper

Monte Carlo Simulations of Production Costs in Discrete Part Manufacturing

Kathrine Spang, Christina Windmark, Jan-Eric Ståhl
(2014)
Conference paper

Machinability of Lead-Free Brass – A comparative study

Fredrik Schultheiss, Erik Lundström, Daniel Johansson, Volodymyr Bushlya, Jinming Zhou, et al.
(2014) Proceedings of the 6th Swedish Production Symposium
Conference paper

Tool Life and Wear Model in Metal Cutting, Part 1 - Influence of Varying Flank Wear Criterion on Colding's Tool Life Equation

Daniel Johansson, Fredrik Schultheiss, Volodymyr Bushlya, Jinming Zhou, Jan-Eric Ståhl
(2014) Proceedings of the 6th Swedish Production Symposium
Conference paper

Grinding or shaving - economic decision support in the production of gears

Carin Andersson, Jan-Eric Ståhl
(2014) , p.1-8
Conference paper

Manufacturing costs as a decisionsupport in production developoment and relocation issues - a case study at a supplier to the automotive industry

Carin Andersson, Jan-Eric Ståhl
(2014) , p.1-10
Conference paper

Characterizing the mechanical properties of skin-core structure in polymer molding process by nanoindentation

Johan Persson, Jinming Zhou, Jan-Eric Ståhl
(2014)
Conference paper

Nyhetsbrev ProMatEn 2014-5

Jan-Eric Ståhl
(2014)
Other

EFFECTS OF COOLING RATE AND SILICON CONTENT ON AL/SICp MMC

Mikael Hörndahl, Emma Bengtsson, Volodymyr Bushlya, Stefan Kristiansson, Jan-Eric Ståhl
(2014)
Conference paper

The link between plasticity parameters and process parameters in orthogonal cutting

Mathias Agmell, Aylin Ahadi, Jan Eric Ståhl
(2013) Procedia CIRP, 8 p.224-229
Conference paper

Performance and wear mechanisms of whisker-reinforced alumina, coated and uncoated PCBN tools when high-speed turning aged Inconel 718

Volodymyr Bushlya, Jinming Zhou, Pajazit Avdovic, Jan-Eric Ståhl
(2013) International Journal of Advanced Manufacturing Technology, 66 p.2013-2021
Journal article

A method for identification of geometrical tool changes during machining of titanium alloy Ti6Al4V

Manouchehr Vosough, Fredrik Schultheiss, Mathias Agmell, Jan-Eric Ståhl
(2013) International Journal of Advanced Manufacturing Technology, 67 p.339-348
Journal article

Conditions for and development of an information technology-support tool for manufacturing cost calculations and analyses

Mathias Jönsson, Carin Andersson, Jan-Eric Ståhl
(2013) International Journal of Computer Integrated Manufacturing, 26 p.303-315
Journal article

Modeling effect of surface roughness on nanoindentation tests

Ling Chen, Aylin Ahadi, Jinming Zhou, Jan-Eric Ståhl
(2013) Procedia CIRP, 8 p.334-339
Conference paper

Sustainable machining through increasing the cutting tool utilization

Fredrik Schultheiss, Jinming Zhou, Elias Gröntoft, Jan-Eric Ståhl
(2013) Journal of Cleaner Production, 59 p.298-307
Journal article

The influence of microstructure and mechanical properties on the machinability of martensitic and bainitic prehardened mould steels

Harned Hoseiny, Berne Hogman, Hans-Olof Andren, Uta Klement, Jan-Eric Ståhl, et al.
(2013) International Journal of Materials Research, 104 p.748-761
Journal article

Effects of Cutting Speed when Turning Age Hardened Inconel 718 with PCBN Tools of Binderless and Low-CBN Grades

Volodymyr Bushlya, Oleksandr Gutnichenko, Jinming Zhou, Pajazit Avdovic, Jan-Eric Ståhl
(2013) Machining Science and Technology, 17 p.497-523
Journal article

Dynamic Stability of the Process of Turning Nickel Superalloys Using a Toolholder Produced by Selective Laser Sintering

Oleksandr Gutnichenko, Volodymyr Bushlya, Jinming Zhou, Pajazit Avdovic, Ulf Simmons, et al.
(2013) Journal of Superhard Materials, 35 p.391-398
Journal article

The influence of tool steel microstructure on friction in sheet metal forming

Lanny Kirkhorn, Volodymyr Bushlya, Mats Andersson, Jan-Eric Ståhl
(2013) Wear, 302 p.1268-1278
Journal article

Influence of the tool surface micro topography on the tribological characteristics in metal cutting - Part II Theoretical calculations of contact conditions

Fredrik Schultheiss, Mikael Fallqvist, Rachid M'Saoubi, Mikael Olsson, Jan-Eric Ståhl
(2013) Wear, 298 p.23-31
Journal article

General Conception of Polar Diagrams for the Evaluation of the Potential Machinability of Workpiece Materials

Linhong Xu, Fredrik Schultheiss, Mats Andersson, Jan-Eric Ståhl
(2013) International Journal of Machining and Machinability of Materials, 14 p.24-44
Journal article

Influence of the tool surface micro topography on the tribological characteristics in metal cutting – Part I Experimental observations of contact conditions

Mikael Fallqvist, Fredrik Schultheiss, Rachid M'Saoubi, Mikael Olsson, Jan-Eric Ståhl
(2013) Wear, 298 p.87-98
Journal article

A modular framework for evaluation of electrical machine production costs

Pontus Fyhr, Mats Andersson, Jan-Eric Ståhl
(2013) 3rd International Electric Drives Conference (E|DPC) , p.136-140
Conference paper

A step towards sustainable machining through increasing the cutting tool utilization

Fredrik Schultheiss, Jinming Zhou, Elias Gröntoft, Jan-Eric Ståhl
(2013) Green Design, Materials and Manudacturing Processes , p.191-196
Conference paper

Wear mechanisms of silicon carbide-whisker-reinforced alumina (Al2O3-SiCw) cutting tools when high-speed machining aged Alloy 718

Volodymyr Bushlya, Jinming Zhou, Pajazit Avdovic, Jan-Eric Ståhl
(2013) International Journal of Advanced Manufacturing Technology, 68 p.1083-1093
Journal article

Extreme Hardness Achievements in Binderless Cubic Boron Nitride Tools

Ammar Melaibari, Zhuoru Wu, Pal Molian, Pranav Shrotria, Volodymyr Bushlya, et al.
(2013) Transactions of the North American Manufacturing Research Institution of SME Volume 41, 2013 , p.449-457
Conference paper

Surface Integrity and the Influence of Tool Wear in High Speed Machining of Inconel 718

Ru Peng-Lin, Jinming Zhou, Sten Johansson, Annethe Billenius, Volodymyr Bushlya, et al.
(2013)
Conference paper

Tool wear and tool life of conventional pcBN, binderless cBN and wBN-cBN tool materials in continuous finish hard turning of cold work tool steel

Volodymyr Bushlya, Oleksandr Gutnichenko, Jinming Zhou, Staffan Gunnarsson, Jan-Eric Ståhl
(2013)
Conference paper

Influence of Dry Cut and Tool Wear on Residual Stresses in High Speed Machining of Nickel-Based Superalloy

Ru Peng-Lin, Jinming Zhou, Sten Johansson, Annethe Billenius, Volodymyr Bushlya, et al.
(2013) Materials Science Forum, 768-769 p.470-477
Conference paper

Analytical Calculation of the True Equivalent Chip Thickness for Cutting Tools and its Influence on the Calculated Tool Life

Jan-Eric Ståhl, Fredrik Schultheiss
(2012) Advanced Materials Research, 576 p.80-86
Journal article

Methodology for evaluating effects of material characteristics on machinability-theory and statistics-based modelling applied on Alloy 718

Stefan Olovsjo, Peter Hammersberg, Pajazit Avdovic, Jan-Eric Ståhl, Lars Nyborg
(2012) International Journal of Advanced Manufacturing Technology, 59 p.55-66
Journal article

Cost Based Process Optimization by Incrementally Changing the Cutting Data during Sustainable Machining

Fredrik Schultheiss, Bengt Lundqvist, Jan-Eric Ståhl
(2012) Advanced Materials Research, 576 p.742-746
Journal article

An investigation of surface damage in the high speed turning of Inconel 718 with use of whisker reinforced ceramic tools

Jinming Zhou, Volodymyr Bushlya, Jan-Eric Ståhl
(2012) Journal of Materials Processing Technology, 212 p.372-384
Journal article

Dynamic manufacturing costs — Describing the dynamic behavior of downtimes from a cost perspective

Jan-Eric Ståhl, Per Gabrielson, Carin Andersson, Mathias Jönsson
(2012) CIRP Journal of Manufacturing Science and Technology, 5 p.284-295
Journal article

Manufacturing costs and Degree of Occupancy Based on the Principle of Characteristic Parts

Christina Windmark, Carin Andersson, Jan-Eric Ståhl
(2012)
Conference paper

Analytical Calculation of the Ra Surface Roughness during Turning

Jan-Eric Ståhl, Fredrik Schultheiss, Sören Hägglund
(2012) Proceedings of the 5th International Swedish Production Symposium , p.185-190
Conference paper

A production performance analysis regarding downtime and downtime pattern

Christina Windmark, Jan-Eric Ståhl, Per Gabrielson, Carin Andersson
(2012)
Conference paper

A Sustainable Approach for Milling of Duplex Stainless Steel by Increasing the Cutting Tool Utilization

Fredrik Schultheiss, Jinming Zhou, Elias Gröntoft, Jan-Eric Ståhl
(2012) Proceedings of the 5th International Swedish Production Symposium , p.171-177
Conference paper

Cost drivers and production limitations for electrified vehicle traction components

Pontus Fyhr, Mats Andersson, Jan-Eric Ståhl
(2012) [Host publication title missing] , p.405-410
Conference paper

The scale of permanent magnet materials for automotive traction motors

Pontus Fyhr, Mats Andersson, Jan-Eric Ståhl
(2012) [Host publication title missing] , p.235-241
Conference paper

Characterization of mechanical properties of machined surface by nanoindentation — Part 1: Simulation of indenter geometry effects

Ling Chen, Aylin Ahadi, Jinming Zhou, Jan-Eric Ståhl
(2012) Swedish Production Symposium, SPS12 : Proceedings
Conference paper

Comprehensive dynamic analysis of vibration and stability when ultrahigh speed turning Inconel 718 with cBN tools

Oleksandr Gutnichenko, Volodymyr Bushlya, Jinming Zhou, Pajazit Avdovic, Jan-Eric Ståhl
(2012) [Host publication title missing] , p.163-170
Conference paper

Study of surface quality in high speed turning of Inconel 718 with uncoated and coated CBN tools

Jinming Zhou, Volodymyr Bushlya, Pajazit Avdovic, Jan-Eric Ståhl
(2012) International Journal of Advanced Manufacturing Technology, 58 p.141-151
Journal article

NEXT STEP in Cost-based Sustainable Production Development - Cases from different Production Operations

Jan-Eric Ståhl
(2012)
Conference paper

Identification of Subsurface Deformation in Machining of Inconel 718

Jinming Zhou, Volodymyr Bushlya, Ru Lin Peng, Jan-Eric Ståhl
(2012) Applied Mechanics and Materials, 117-119 p.1681-1688
Journal article

The affect of Johnson Cook plasticity parameters on the cutting process parameters

Mathias Agmell, Aylin Ahadi, Jan-Eric Ståhl
(2012) Proceedings of the 5th Swedish Production symposium (SPS'12)
Conference paper

Modelling Subsurface Deformation in High Speed Machining of Inconel 718

Mathias Agmell, Jinming Zhou, Aylin Ahadi, Volodymyr Bushlya, R.L. Peng, et al.
(2012)
Conference paper

Effect of cutting speed on machinability of Alloy 718 with conventional and binderless cBN tools

Volodymyr Bushlya, Oleksandr Gutnichenko, Jinming Zhou, Pajazit Avdovic, Volodymyr Turkevych, et al.
(2012)
Conference paper

Improved Tribotesting for Sheet Metal Forming

Lanny Kirkhorn, Kenneth Frogner, Mats Andersson, Jan-Eric Ståhl
(2012) Procedia CIRP, 3 p.507-512
Conference paper

Effect of Cutting Conditions on Machinability of Superalloy Inconel 718 During High Speed Turning with Coated and Uncoated PCBN Tools

Volodymyr Bushlya, Jinming Zhou, Jan-Eric Ståhl
(2012) Procedia CIRP, 3 p.370-375
Conference paper

A cost model for determining an optimal automation level in discrete batch manufacturing

Christina Windmark, Per Gabrielson, Carin Andersson, Jan-Eric Ståhl
(2012) Procedia CIRP, 3 p.73-78
Conference paper

Relations between Volume Flexibility and Part Cost in Assembly Lines

Mathias Jönsson, Carin Andersson, Jan-Eric Ståhl
(2011) Robotics and Computer-Integrated Manufacturing, 27 p.669-673
Conference paper

Characterization of White Layer Generated when Turning Aged Inconel 718

Volodymyr Bushlya, Jinming Zhou, Filip Lenrick, Pajazit Avdovic, Jan-Eric Ståhl
(2011) Procedia Engineering, 19 p.60-66
Conference paper

Improved tool wear properties in sheet metal forming using Carbide steel, a novel abrasion resistant cast material

Lanny Kirkhorn, Anders Nilsson, Mats Andersson, Jan-Eric Ståhl
(2011) Wear, 271 p.1280-1287
Journal article

Experimental studies of cutting force variation in face milling

Carin Andersson, Mats Andersson, Jan-Eric Ståhl
(2011) International Journal of Machine Tools & Manufacture, 51 p.67-76
Journal article

Evaluating the Machinability of Inconel 718 Using Polar Diagrams

Pajazit Avdovic, Linhong Xu, Mats Andersson, Jan-Eric Ståhl
(2011) Journal of Engineering for Gas Turbines and Power, 133 p.113-133
Journal article

A numerical and experimental investigation of the deformation zones and the corresponding cutting forces in orthogonal cutting

Mathias Agmell, Aylin Ahadi, Jan-Eric Ståhl
(2011) Advanced Materials Research, 223 p.152-161
Conference paper

Experimental Study of the Minimum Chip Thickness during the Machining of Duplex Stainless Steel

Fredrik Schultheiss, Mathias Agmell, Bengt Högrelius, Volodymyr Bushlya, Jan-Eric Ståhl
(2011) AMST'11 - Advanced Manufacturing Systems and Technology , p.175-189
Conference paper

Machinability of duplex stainless steels - A study with focus on the tool wear behaviour

Fredrik Schultheiss, Jan-Eric Ståhl
(2011) [Host publication title missing] , p.271-277
Conference paper

A new concept of coil design for industrial induction heating

Kenneth Frogner, Leif Siesing, Mats Andersson, Tord Cedell, Jan-Eric Ståhl
(2011) Proceedings of the Swedish Production Symposium 2011, SPS11
Conference paper

Modeling of maintenance costs

Carin Andersson, Mathias Jönsson, Jan-Eric Ståhl
(2011)
Conference paper

Cost Optimization by Incremental Production Improvements of Metal Cutting Operations

Fredrik Schultheiss, Mathias Jönsson, Bengt Lundqvist, Jan-Eric Ståhl
(2011) [Host publication title missing] , p.540-547
Conference paper

Development of a Novel Superfinishing Apparatus for Controlled Texturing of Functional Surfaces

Lanny Kirkhorn, Kenneth Frogner, Tord Cedell, Mats Andersson, Jan-Eric Ståhl
(2011)
Conference paper

Dynamic Manufacturing Costs - Describing the Dynamic Behavior of Downtimes from a Cost Perspective

Mathias Jönsson, Per Gabrielson, Carin Andersson, Jan-Eric Ståhl
(2011)
Conference paper

Process induced subsurface deformation of Alloy 718 in relation to different cutting conditions

Jinming Zhou, Volodymyr Bushlya, Peng Ru, Pajazit Avdovic, Jan-Eric Ståhl
(2011) , p.263-270
Conference paper

The development of NEXT STEP beyond Lean Production - The link between technology and economics with focus on sustainable developments

Jan-Eric Ståhl
(2011)
Conference paper

Study on work-hardening phenomena in machining aged Alloy 718

Volodymyr Bushlya, Jinming Zhou, Pajazit Avdovic, Jan-Eric Ståhl
(2011)
Conference paper

A fully coupled thermomechanical two-dimensional simulation model for orthogonal cutting: formulation and simulation

Mathias Agmell, Aylin Ahadi, Jan-Eric Ståhl
(2011) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 p.1735-1745
Journal article

Effects of Tool Wear on Subsurface Deformation of Nickel-based Superalloy

Jinming Zhou, Volodymyr Bushlya, Ru Lin Peng, Sten Johansson, Pajazit Avdovic, et al.
(2011) [Host publication title missing], 19 p.407-413
Conference paper

Modelling tool life in the machining of strain-hardening material - Alloy 718

Jan-Eric Ståhl, Pajazit Avdovic, Volodymyr Bushlya, Jinming Zhou
(2011)
Conference paper

A fully coupled thermo-mechanical simulation model for orthogonal cutting-formulation and validation

Mathias Agmell, Aylin Ahadi, Jan-Eric Ståhl
(2011) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 p.1735-1745
Journal article

On the analytical representation of chip area and tool geometry for the case of oblique turning with chamfered round tools. Part 2: Variation of tool angles along the edge line

Volodymyr Bushlya, Jinming Zhou, Jan-Eric Ståhl
(2011)
Conference paper

On the analytical representation of chip area and tool geometry for the case of oblique turning with chamfered round tools. Part 1: Chip area parameters under both side and back rake angles variation

Volodymyr Bushlya, Jinming Zhou, Jan-Eric Ståhl
(2011)
Conference paper

On the surface quality of Alloy 718 in finishing turning with CBN cutting tools

Jinming Zhou, Volodymyr Bushlya, Pajazit Avdovic, Jan-Eric Ståhl
(2011)
Conference paper

Industrial heating using energy efficient induction technology

Kenneth Frogner, Mats Andersson, Tord Cedell, Leif Siesing, Peter Jeppsson, et al.
(2011) Proceedings of the 44th CIRP International Conference on Manufacturing Systems
Conference paper

Analytical and Experimental Determination of the Ra Surface Roughness during Turning

Jan-Eric Ståhl, Fredrik Schultheiss, Sören Hägglund
(2011) Procedia Engineering , p.349-356
Conference paper

Evaluating the machinability of Inconel 718 using polar diagrams

Pajazit Avdovic, Linhong Xu, Mats Andersson, Jan Eric Ståhl
(2010) ASME Turbo Expo 2010 : Power for Land, Sea, and Air, GT 2010, 1 p.987-996
Conference paper

Machinability prediction of workpiece material with a diagraph method

Linhong Xu, Zhengfeng Jiang, Jan Eric Stahl
(2010) Advanced Materials Research, 97-101 p.2072-2075
Conference paper

Improving waviness of bore in precision hard turning by pressurized coolant

Jinming Zhou, Stefan Hognas, Jan-Eric Ståhl
(2010) International Journal of Advanced Manufacturing Technology, 49 p.469-474
Journal article

Indication of cracking during pressing of advanced thin plates using an AE-based monitoring system

Per Gabrielson, Thomas Skåre, Jan-Eric Ståhl
(2010) Tools and Technologies for the Processing of Ultra High Strength Steels: IDDRG Conference Proceedings ; 50th Anniversary Conference, 2010 May 31 - Juni 02, Graz, Austria , p.925-934
Conference paper

FE analyses of orthogonal cutting

Mathias Agmell, Aylin Ahadi, Jan-Eric Ståhl
(2010) , p.120-125
Conference paper

A parametric Analysis of the Undeformed Chip Geometry in Gear Hobbing

Lars Vedmar, Carin Andersson, Jan-Eric Ståhl
(2009) Journal of Manufacturing Science and Engineering, 131 p.1-061003
Journal article review

Modeling of the stagnation zone in the metal cutting process

Mathias Agmell, Aylin Ahadi, Jan-Eric Ståhl, Mats Andersson
(2009)
Conference paper: abstract

New advances in soft magnetic materials - properties of moulded flux conductors in inductors and electrical motors

Tord Cedell, Peter Jeppsson, Mats Andersson, Jan-Eric Ståhl, Conny Högmark, et al.
(2009)
Conference paper

Identification of plastic deformation and progressive wear of cutting tools

Jan-Eric Ståhl, Fredrik Schultheiss, Manouchehr Vosough
(2009) Swedish Production Symposium SPS 09, Göteborg
Conference paper

Implementation of an economic model to simulate manufacturing costs

Mathias Jönsson, Carin Andersson, Jan-Eric Ståhl
(2008) Manufacturing Systems and Technologies for the New Frontier , p.39-44
Conference paper

Greencut - an attempt to introduce an environmentally sustainable system for complex cutting tools

Lanny Kirkhorn, Mats Andersson, Susanna Weinberger, Jan-Eric Ståhl
(2008)
Conference paper

An analythical geometry study of gear hobbing

Lars Vedmar, Carin Andersson, Jan-Eric Ståhl
(2008)
Conference paper

Tribological analysis of the machinability of compacted graphite iron

Vanessa Seyda, Mats Andersson, Jan-Eric Ståhl
(2008)
Conference paper

Modelling ot metal cutting tool wear based on Archards wear equation

Jan-Eric Ståhl, Mats Andersson
(2008)
Conference paper

A general economic model for manufacturing cost simulation

Mathias Jönsson, Carin Andersson, Jan-Eric Ståhl
(2008) Manufacturing Systems and Technologies for the New Frontier , p.33-38
Conference paper

Tribological analysis in comparison of dry and air assisted maching

Bulent Tasdelen, Jinming Zhou, Jan-Eric Ståhl
(2008)
Conference paper

Software realization of the TESSPA method-criteria description and software performance analysis

Mathias Jönsson, Carin Andersson, Jan-Eric Ståhl
(2008)
Conference paper

Modeling the cooling effect in compressed air assisted machining

Bulent Tasdelen, Hans Walter, Jinming Zhou, Jan-Eric Ståhl, Jacek Kaminski
(2008)
Conference paper

Experimental studies of cutting force variation in face milling

Carin Andersson, Mats Andersson, Jan-Eric Ståhl
(2008)
Conference paper

Modelling of metal cutting tool wear based on Archard’s wear equation

Jan-Eric Ståhl, Mats Andersson
(2008) Proceedings of the Swedish Production Symposium, SPS 08 Stockholm
Conference paper

Polar machinability diagrams - a model to predict the machinability of a work material

Jan-Eric Ståhl, Mats Andersson
(2007)
Conference paper

A Basic Economic Model for Judging Production Development

Jan-Eric Ståhl, Carin Andersson, Mathias Jönsson
(2007) Proceedings of the 1st International Swedish Production Symposium
Conference paper

Modelling of the composite temperature 8c in metal cutting tools

Hans Walter, Jan-Eric Ståhl, Mats Andersson
(2007)
Conference paper

Manufacturing economic simulation of a flexible manufacturing cell

Mathias Jönsson, Carin Andersson, Jan-Eric Ståhl
(2007)
Conference paper

Analytic modelling of contact stresses around the honed edge in metal cutting - based on cutting force measurements

Viktor Persson, Carin Andersson, Carlos Bueno-Martinez, Mikael Svensson, Mats Andersson, et al.
(2007)
Conference paper

Flex-rail: a semi industrial test tool for various applications such as: Springback analysis

Alf Andersson, Daniel Wiklund, Tord Cedell, Ramin Moshfegh, B-G Rosén, et al.
(2007)
Conference paper

Coldings tool life model applied on tool wear when machining the Maxthal material

Jan-Eric Ståhl, Bengt Högrelius, Mats Andersson, Jens-Petter Palmquist
(2007)
Conference paper

True equivalent chip thickness for tools with a nose radius

Jan-Eric Ståhl, Mats Andersson, Carin Andersson
(2007)
Conference paper

Hard milling of abrasion resistance cast iron with pcbn cutting tool

Jinming Zhou, Anders Nilsson, Fredric Krantz, Mats Andersson, Jan-Eric Ståhl
(2007)
Conference paper

Identification of cutting errors in precision hard turning process

Jinming Zhou, Mats Andersson, Jan-Eric Ståhl
(2004) Journal of Materials Processing Technology, 153-154 p.746-750
Journal article

Machining characteristics of novel-abrasion resistant iron

Jinming Zhou, A Nilsson, Mats Andersson, Jan-Eric Ståhl
(2004) Journal of Materials Processing Technology, 153-154 p.751-757
Journal article

The monitoring of flank wear on the CBN tool in the hard turning process

Jinming Zhou, M Andersson, Jan-Eric Ståhl
(2003) International Journal of Advanced Manufacturing Technology, 22 p.697-702
Journal article

Effect of chamfer angle on wear of PCBN cutting tool

Jinming Zhou, Hans Walter, Mats Andersson, Jan-Eric Ståhl
(2003) International Journal of Machine Tools & Manufacture, 43 p.301-305
Journal article

Zinc-alloys as tool materials in short-run sheet-metal forming processes - Experimental analysis of three different zinc-alloys

Anders Nilsson, Per Gabrielson, Jan-Eric Ståhl
(2002) Journal of Materials Processing Technology, 125-126 p.806-813
Journal article

Bandsawing. Part II: detecting positional errors, tool dynamics and wear by cutting force measurement

Carin Andersson, Jan-Eric Ståhl, H Hellbergh
(2000) International Journal of Machine Tools & Manufacture, 41 p.237-253
Journal article

Bandsawing. Part I: cutting force model including effects of positional errors, tool dynamics and wear

Carin Andersson, Mats Andersson, Jan-Eric Ståhl
(2000) International Journal of Machine Tools & Manufacture, 41 p.227-236
Journal article

Monitoring of friction processes by the means of acoustic emission measurements—deep drawing of sheet metal

T Skåre, P Thilderkvist, Jan-Eric Ståhl
(1998) Journal of Materials Processing Technology, 80-81 p.263-272
Journal article

Recycled carbon fibre composite as reinforcing elements in thermoplastic composites

T Pisanikovski, J Wahlberg, Jan-Eric Ståhl
(1998) Science, technologies and applications
Conference paper

Study of Mechanical Load at Entry and Exit Phase of the Intermittent Cut

Jinming Zhou, Mats Andersson, Jan-Eric Ståhl
(1998) TID: Teknologiskt Integrerade Detaljtillverkningssystem , p.58-68
Conference paper

Adaptiv reglering av verktygvibrationer vid svarvning

L Håkansson, I Claesson, Jan-Eric Ståhl, Mats Andersson
(1998) TID: Teknologiskt Integrerade Detaljtillverkningssystem , p.69-78
Conference paper

Samverkan mellan Mekaniska och Termiska Belastningar Verkande på Skärverktyg

Jan-Eric Ståhl, H Walter, P-O Sturesson, Jinming Zhou, Mats Andersson
(1998) TID: Teknologiskt Integrerade Detaljtillverkningssystem , p.31-40
Conference paper

Cutting Tool Fracture Prediction and Strength Evaluation by Stress Identification, Part II: Experimental Studies

Jinming Zhou, Mats Andersson, Jan-Eric Ståhl
(1997) International Journal of Machine Tools & Manufacture
Journal article

Miljö och kretsloppsanpassning av produktionsmetoder för högpresterande kolfiberkompositer

Jan-Eric Ståhl, P Reinholdsson, S Krantz, C-H Andersson, H Kling, et al.
(1997)
Report

Cutting Tool Fracture Prediction and Strength Evaluation by Stress Identification Part I: Stress Model

Jinming Zhou, Mats Andersson, Jan-Eric Ståhl
(1997) International Journal of Machine Tools & Manufacture, 37 p.1691-1714
Journal article

Analysis of Mechanical Load in the Cutting Tool at Entry and Exit Phase of the Intermittent Cut

Jinming Zhou, Mats Andersson, Jan-Eric Ståhl
(1997) Submmited to Proceedings of Institution of Mechanical Engineering
Conference paper

Granuleringsmekanik för sammansatta polymerbaserade material

T Pisanikovski, Jan-Eric Ståhl
(1997)
Report

A system for monitoring cutting tool spontaneous failure based on the cutting edge stress estimation

Jinming Zhou, Mats Andersson, Jan-Eric Ståhl
(1995) Journal of Materials Processing Technology, 48 p.231-237
Journal article

Cutting force model for multi-toothed cutting processes and force measurement equipment for face milling

C Adolfsson, Jan-Eric Ståhl
(1995) International Journal of Machine Tools & Manufacture, 35 p.1715-1728
Journal article

Thermo-Elastic and Traction Load Stress Analysis of the Cutting Tool In Continues Cutting Conditions

P-O Sturesson, Jan-Eric Ståhl
(1995) Sixth International Conference on Manufacturing Engineering: Manufacturing; a Global Perspective; Proceedings
Conference paper

Identification of mechanical load in cutting tool using an artificial neural network

Jinming Zhou, O Hansson, P-O Sturesson, Jan-Eric Ståhl
(1995) Sixth International Conference on Manufacturing Engineering: Manufacturing; a Global Perspective; Proceedings, 1 p.153-159
Conference paper

Machining of ring shaped worn pieces

M F Walter, Jan-Eric Ståhl
(1995) Journal of Materials Processing Technology, 48 p.239-245
Journal article

An approach for on-line cutting edge stress estimation

Jinming Zhou, P-O Sturesson, H Sandqvist, Jan-Eric Ståhl
(1994) International Journal of Machine Tools & Manufacture, 34 p.741-751
Journal article

Cutting tool mechanical load simulation in turning operation

Jinming Zhou, Mats Andersson, Jan-Eric Ståhl
(1994) Proceedings of the S.M. Wu Symposium on Manufacturing Science , p.27-33
Conference paper

Warp-knitted direct oriented structures for pre-shaped composites

C-H Andersson, K Eng, W Zäh, Jan-Eric Ståhl
(1994) 6. Internationales Techtextil-Symposium
Conference paper

The connection between cutting and clamping forces in turning

M F Walter, Jan-Eric Ståhl
(1994) International Journal of Machine Tools & Manufacture, 34 p.991-1003
Journal article

Static and Dynamic Friction Processes Under the Influence of external Vibrations

Thomas Skåre, Jan-Eric Ståhl
(1992) Wear, 154 p.177-192
Journal article

Giant magnetostrictive composite material for ultrasonic applications

L Sandlund, M Fahlander, Tord Cedell, Jan-Eric Ståhl
(1992) Actuator 92 : 24 - 26 June, 1992, Bremen, Germany ; conference proceedings , p.249-251
Conference paper

New Developments In One Stroke Actuators Based on High Magnetistrictive Materials

T Skåre, Jan-Eric Ståhl
(1992) Actuator 92 : 24 - 26 June, 1992, Bremen, Germany ; conference proceedings , p.149-151
Conference paper

Bildning, transport och eliminering av damm vid bearbetning av fibrer, förformar och kompositer

Carl-Håkan Andersson, Jan-Eric Ståhl, Roland Akselsson, Staffan Krantz, Bengt Kristensson
(1992) Stoftanalys , p.131-135
Journal article

Metals with Unique Functional Properties

Jan-Eric Ståhl
(1991) Technical Report - Materials Research Consortia and New Industrial Programme.
Report

Vibration excitated low-pressure casting a new route to produce metal matrix composites

L-O Pennander, Jan-Eric Ståhl, C-H Andersson
(1991) Composites : design, manufacture, and application ; proceedings
Conference paper

Theories for adaptive control of chucking devices in NC-turning centers

M Walter, Jan-Eric Ståhl
(1991) Information technology for advanced manufacturing systems : proceedings , p.249-256
Conference paper

Deformation problems connected with clamping of ring shaped workpieces in turning operations

M Walter, Jan-Eric Ståhl
(1989) Applied mechanics : proceedings of the International Conference on Applied Mechanics, 2 p.728-733
Conference paper

Plastic deformation and machining properties of some low volume fraction short-fiber reinforced matrix composite materials

C-H Andersson, Jan-Eric Ståhl, Mats Andersson
(1988) Mechanical and physical behaviour of metallic and ceramic composites: Proceedings of the Ninth Risø International Symposium on Metallurgy and Materials Science , p.263-268
Conference paper

Jan-Eric Ståhl

Research:

Teaching:

Publications